900mW 405nm BDR-209 Blu-Ray Copper Laser Module W/Boost Driver & G-2 Glass Lens

Description

Listing is for a single 900mW 16X 405nm BDR-209 Diode in Copper Module W/Boost Driver & G-2 Glass Lens. Perfect for running off a single rechargeable 3.7V Li-Ion or a 5V 2A wall adapter. Unit is ready to be dropped into your final project. Just place in a heatsink and apply 3-5V from a 2A+ capable power supply.
The copper module upgrade provides a huge
improvement
in thermal
conductivity
over the standard brass module for moving the heat away from the diode to your heatsink which gives a much more stable output from the diode.
Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering.
Here is what you get. The driver is contained in the module.
You can discard the back half if you need the extra room just be careful not to let the driver short on anything.:)
This is the most powerful 405 diode available currently. When driven @ 600mA you can  expect 900mW+ with a G-2 lens and 650mW+ like how this module is set up with a three element 405 AR  coated glass lens but the diodes. Efficiency will vary a little and I  have seen some hit as high as 1.1W with a G-2 being driven @ 600mA.
Wire assignment is:
Red +
Black -
Specs
Wavelength                                      405nm +/- 5nm
Input Voltage                                    3V-5.5V
Driver Output Current                      520mA
Driver Current Draw                       1100mA +/- 0.5A
Power Output                                  850mW-950mW
Driver Type                                      Constant Current
Lens                                                 9mm Threaded 405-G-2 Glass Lens
Reverse Polarity Protection              Yes driver will blow fuse to prevent damage to diode
Duty Cycle                                       Continuous with proper heatsinking
900mW 405nm 16X BDR-209DBK Diode
After mounting it up time for a power test using a 405-G-2 lens.
Graph courtesy of ARG.
*Disclamer*
By purchasing these diodes you are agreeing to the following.
- You are over 18 years of age .
- You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product.
- You will use these as components and properly incorporate them into a finished product.
- You will use these diodes/modules in a safe and responsible manner and for a legal purpose.
- You are legally responsible for the use of these components, improper use of these components or their end products.
- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.
- You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.