-40%

25mm 4.3W NUBM08 455nm Laser Diode In 25mm Copper Module W/Leads & DTR-G-8 Lens

$ 54.91

Availability: 22 in stock
  • Restocking Fee: 10%
  • Item must be returned within: 30 Days
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Model: NUBM08
  • Condition: New
  • UPC: Does not apply
  • Brand: DTR's Laser Shop
  • MPN: NUBM08
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Seller

    Description

    Listing is for a single 9mm
    4.3W NUBM08 455nm
    laser diode
    mounted in a large 25mm x 30mm copper module with thermal back half, leads and a DTR-G-8 glass lens.
    This module is designed for easy mounting in a 25mm XYZ mount that you can purchase separately like this one.
    SK-25 Bearing CNC Aluminum Rail Linear Motion Shaft Support Series Slide 25mm
    This NUBM08 diode is capable of over 5W output when using a DTR-G-8 lens and 4A current with proper heatsinking.
    Save yourself the headache of pressing and soldering. Just add a laser driver limiting the current to 4A or less.
    Diodes are current hungry and as they heat up their internal resistance is  lowered causing them to want to draw more current. Don't attempt to  connect the diode directly to a fixed voltage source like a battery. You must use a laser driver limited to no more than 4.5A to power this diode.
    DTR-G-8 glass
    Collimating Lens
    .
    Broadband AR Coating 400nm-700nm
    Yep this is the new DTR-G-8 Lens. See lens comparison on the testing thread over on the forums here.
    DTR-G-8
    Finally a lens that removes near all
    aberrations
    caused
    by stray light, compacts the
    output
    for a greatly reduced spot size while
    maintaining
    a
    90%
    pass
    efficiency compared to a 96% pass efficiency using a real
    DTR-G-2
    .
    Suggested Drivers I carry
    SXD Super X-Drive Laser Driver
    ACS4500BU Laser Driver
    Blackbuck 8M Laser Driver
    Here is what you get. One
    9mm
    4.3W NUBM08 455nm
    diode
    mounted in a large 25mm x 30mm copper module with leads and a DTR-G-8 glass lens
    .
    Here is one mounted in a 25mm XYZ mount that you can purchase separately like this one.
    SK-25 Bearing CNC Aluminum Rail Linear Motion Shaft Support Series Slide 25mm
    NUBM08 4.3W 455nm Laser Diode
    The new stock lens looks to be a shorter focal length lens.
    I will add more details as I get time to test them. The divergence from first glance seems the same as the NUBM44.
    The diode has a pretty hard knee at 5A. I think 4A will be the sweet spot for this diode. It is bluer than the NUBM44 but not nearly as blue as the NUBM07. In the middle
    maybe
    a little closer to the NUBM44 but that bump in wavelength will give it a pretty serious bump in visibility.
    Power Test with DTR-G-2 Lens